Blichmann BrewEasy - Adapter Lid Kit - 20 gallon (G1)
Blichmann BrewEasy - Adapter Lid Kit - 20 gallon (G1) **FOR G1 KETTLES ONLY**
The adapter lid kit is the heart of the BrewEasy system and includes the special lid that allows the kettles to be stacked and the wort drain tube installed. It includes the adapter lid, an AutoSparge™ level and flow control system, a drain tube with flow orifice kit, and all the needed fittings, silicone hose, and QuickConnector™ fittings you will need to operate the BrewEasy™ all-grain system.
The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time. The BrewEasy™ provides all the simplicity of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the ramping capability of a traditional RIMS system, eliminates the messy and unsafe lifting of hot grains, and provides better wort clarity than BIAB. Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you!
Efficient, fast, and it lets you BrewEasy™! Already a Blichmann Engineering BoilerMaker™ owner? Awesome! The BrewEasy™ is modular in nature so you only buy what you need! Currently offered in a gas version, an electric model will be available soon!
How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process. While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort. Simply start with ALL of your brewing water (liquor) for your brew day and place about half in the lower kettle (boil kettle) and the remainder in the upper kettle (mash tun). Set your AutoSparge™, turn on the pump and add heat. The liquor will recirculate from the boil kettle, into the mash tun, and back into the boil kettle. When the liquor has reached the dough in temperature, turn off the pump and add your malt. Ramping through several temperature rests is as easy as turning on the burner! When you're through your mash, simply turn off the pump and let all the wort from your mash tun drain into your boil kettle and boil as normal. It's as simple as that!
Looking for automation? Add in the TOWER of POWER™ temperature control module and convenient TOWER LTE™ stand!
*Note this is not a standard stocked item and is ordered direct from the manufacturer. Please allow 1-3 weeks for delivery.